NHBS Guide to small mammal survey equipment

Small mammals are common and widespread across many of our terrestrial ecosystems. They play a crucial role in ecosystem food-webs as key prey species for many carnivores and are also useful as indicator species for agricultural change and development. Consequently, surveys of small mammal populations can be a useful tool for ecologists, researchers, and conservationists alike.

Small mammals are most commonly monitored through the use of live traps. These allow a range of species to be monitored simultaneously and also allow biometric data such as weight and sex to be collected. In addition, estimates of population size and structure can be calculated using capture-mark-recapture (CMR) techniques. However, other more passive monitoring techniques such as dormouse nest tubes, hair tube, and footprint tunnels are also available. Below we will take a look at some of the most popular small mammal survey equipment.

Longworth Traps

Longworth traps have been widely used in the UK for many years. They are made from lightweight yet durable aluminium and have been consistently well documented in scientific literature and ecological reports.

The trap consists of two parts: a tunnel which contains the door tripping mechanism, and a nest box, which is attached to the back of the tunnel. The nest box provides a large space for food and bedding material to ensure that the trapped animal is comfortable until release. The sensitivity of the trigger mechanism can be adjusted depending on the target species, although Pygmy shrews have been known to be too light to trigger the mechanism. The door can be locked open for pre-baiting for ease of use.

The Longworth trap comes as two options: with a shrew hole or without a shrew hole (Please note that shrews are a protected species so ensure you are aware of the relevant laws in the country in which you are trapping).

Sherman Traps

Sherman traps are another popular live-trap which can be folded flat for ease of transport and storage. They work by a trigger platform which causes the entrance door to shut when an animal runs into the trap. Sherman traps are formed of one compartment and because of this, it can be difficult to add food/bedding into the trap without interfering with the trigger platform. The traps may also distort over time with repeated folding. Sherman traps come in a variety of sizes and lengths so that you can find a trap to best suit your target species and can be purchased as either an aluminium or galvanised version which is more resistant to rusting.

Lifetrap

The Lifetrap (also known as the Heslinga) has a similar set-up to a Longworth trap – with a tunnel and nest-box – but with a slightly different tripping mechanism. All the openings have been kept as narrow as possible to avoid damage from the gnawing of trapped animals. The trap is made from lightweight aluminium with a green powder-coating for effective camouflage in the field.

Footprint Tunnel

Footprint tunnels are a less invasive method of surveying small mammals. Species presence/absence can be determined by examining the footprints made by mammals that have walked over an ink pad to reach the bait left in the tunnel. This method is especially useful for determining the presence of hedgehogs that are not otherwise easily ‘trapped’. The tunnel comes with a UK mammal footprint identification sheet; however it can be difficult to distinguish between some species of smaller mammals.

Squirrel Hair Traps

Squirrel hair traps are another non-invasive survey method that is designed for red squirrel survey. When squirrels pass through the baited trap, their hair is collected on sticky tabs within the tube. These hairs can then be analysed to determine the presence of red squirrels in the area.

 

Dormouse Tubes

Dormouse nest tubes are a cheap, easy and very popular method of determining the presence of dormice within a habitat. The tubes consist of a wooden tray and a nesting tube. Dormice make nests in the tubes and it is these that are used as indicators of their presence in the habitat. Dormice are legally protected in the UK and must not be handled unless you have a licence to do so. Nest tubes can be set up and checked without a licence until the first evidence of dormouse activity is found. After that, only a licensed handler can check them.

Dormouse Footprint Tunnel

Dormouse Footprint Tunnels offer a very low disturbance method of detecting dormouse presence in a habitat. Dormice passing through the tunnel cross over inked pads which causes them to leave characteristic footprints on the card or paper inserts. The Suffolk Wildlife Trust and CIEEM have suggested that footprint tunnels may be a more effective survey tool within scrub and hedgerow habitats than dormouse tubes, and equally as effective in high canopy woodland.

Accessories

Listed below are some of the essential accessories which are required for surveying small mammals:

Small Mammal Holding Bag

Pesola Light-Line Spring Scales

Pesola PTS3000 Electronic Scale

Heavy Duty Extra-Large Polythene Sample Bags

Animal Handling Gloves

Marking Flags

Field Guides and Books

There are many excellent field guides and books available which can greatly assist with reliably identifying and surveying small mammals in the UK.


Atlas of the Mammals of Great Britain and Ireland
Hardback | Mar 2020

The most up-to-date records of mammal distributions in Great Britain and Ireland. Fully illustrated with photographs and high-resolution distribution maps and details of species identification.

 

Methods for Ecological Research on Terrestrial Small Mammals
Hardback | Apr 2022

This is a one-stop resource compiling all the informaiton readers need to conduct state-of-the-art research on small terrestrial mammals across the globe. It covers the full spectrum of issues, from capture, handing, identification, reproduction, demography, and taxonomy to behaviour, diet, evolution, diseases, movements, morphometrics, and more.

Live Trapping of Small Mammals
Paperback | Jul 2019

Published by  The Mammal Society, this compact guide is the essential text for anybody looking to survey small mammals in the UK. It contains detailed practical instructions on survey methodology, complemented by colour photographs and illustrations.

 

Britain’s Mammals
Paperback | Apr 2017

The perfect companion for anyone interested in watching mammals. This field guide combines concise descriptions of species life-history and distribution along with detailed colour photographs to help you reliably identify the mammals of Britain and Ireland.

 

The Analysis of Owl Pellets
Paperback | Apr 2009

This handy booklet provides information on how to identify and analyse the undigested small mammal remains found in owl pellets.

 

 

British Mammal Tracks and Signs
Unbound | Jan 2022

This guide features clear illustrations of the tracks left by mammals with paws and cloven hooves, as well as droppings, burrows, nests and feeding remains.

 

 

A note on licensing

Please note that some small mammal species are protected by law (e.g. shrews and dormice in the UK) and you must obtain a license from Natural England, Scottish Natural Heritage or the Natural Resources Wales if you set traps with the intention of trapping any species of shrew. Please ensure you are aware of and meet the requirements of any relevant laws in the country in which you are trapping. Please visit https://www.gov.uk/government/publications/survey-or-research-licence-for-protected-species for more information.

The NHBS Guide to Hand Lenses

The possession of a hand lens is one of the defining characteristics of a naturalist.

We use them for everything from peering at beetle genitalia and examining floral characters, to examining the arrangement of teeth in small mammal jaw bones. There are a wide variety of hand lenses on the market so how do you decide which lens is best for you? This article contains all the information you need to make an informed choice.

Glass versus plastic lens?

The optic in a hand lens can be made from glass or plastic. Serious naturalists and professionals will always choose a glass lens. Plastic lenses are generally more affordable and lighter but are of lower optical quality and are more difficult to clean. Plastic hand lenses and magnifiers, however, can be a good choice for schools and young children, for these users have a look at the Hand Held Magnifier.

How many optical elements?

Canon 400mm

An element is an individual piece of glass within a lens. When you look through a high quality camera lens you will typically be viewing what’s in front of the lens through four to six lens elements, as well as other elements used for focusing and zooming (see image below right).

Paul Canon EF 400mm f/4 DO IS USM By Paul Chin

Hand lenses are constructed with one (singlet), two (doublet) or three (triplet) lens elements. Each one is specially shaped to correct for a particular type of optical distortion, so the more elements, the higher quality the image.

 

The highest quality lenses that we offer are the triplet products made by Kite and Belomo. These offer a bright, crystal clear and undistorted view of your subject. The images afforded by these optics will impress the user whatever their field of work is, be it geology, entomology or botany.

 

N.B. There is a brand of hand lens / loupe called “Triplet”. Please note that despite the brand name this popular product has one lens (singlet).

 

If you are interested in obtaining a doublet hand lens you should consider those that are manufactured by Opticron and also Kite. Opticron will be a familiar name if you have ever researched the purchase of a pair of binoculars and their hand lenses provide excellent distortion free magnification at 6x, 10x and 15x.

Magnification

A 10x magnification hand lens will be more than adequate for most purposes. Higher magnification lenses tend to be harder to use but are very useful for viewing extremely small objects. If you are unsure of which magnification you need, or think you may need several different lenses, you might consider the Triple Hand Lens (x3, x4 and x5).

Lens diameter

Large diameter lenses provide a wider field of view which means that they are easier to use but they are slightly more expensive to produce.

How hand leOpticron Hand lens, 23mm, 10x magnificationnses are named

Hand lenses are named in the same way as binoculars, with both the lens diameter and the magnification included in the name. For example, the Opticron Hand Lens, 23mm, 10x Magnification has a 23mm diameter lens and provides 10x magnification.

LED Option

Some hand lenses such as the LED Triplet Loupe Hand Lens 10x 21mm possess LED lighting in order to illuminate the object that you are viewing. This option can greatly improve your viewing experience and can be particularly valuable in low light conditions. Bat workers have expressed how useful these can be when looking for the key identifying features of a specimen held in the hand. Using a lens with LED can reduce stress on the bat because it means that you do not have to point the beam of your head torch directly at the animal.

Using your hand lens

Finally, a quick note on hand lens technique. To use your hand lens correctly, hold the lens close to your eye and then either a) move the subject closer to your eye until it comes in to focus or b) move your head (and the hand lens) closer to the subject until it comes into focus. The magnification of your lens will affect your positioning, as the higher the magnification, the smaller the focal length (the distance between the lens and the object) will be.

Getting the light right is also an important part of using your hand lens. You need a good source of light. Ideally, bright daylight but other bright light sources such as ceiling lights are sufficient. The light should be between your lens and the object, pointed at the object and not the magnifier. Any reflection on the lens can obscure the focus. This may require a little experimenting with your positioning until you get it right. It’s easy with a little practice so don’t get put off if you find a new hand lens difficult at first. Expect to get close up to what you’re examining – it’s quite common to see naturalists crawling around on the ground to get close to a plant they’re identifying.

Keeping your hand lens safe

It can be very hard to find a much-loved hand lens dropped in long grass or woodland. To prevent this happening, we recommend a lanyard for your hand lens –  if you have it round your neck you won’t drop it!

For storage and transport purposes most hand lenses come equipped with either a storage pouch or a plastic case. These enable you to keep your optic safe and reduce the risk of scratches or knocks occurring, especially when it is being carried in a pocket or bag. Spare leather pouches are available for the Triplet Loupe 10x 21mm but these may fit other lenses as well – we are happy to check before you buy.

Our full range of lenses and magnifiers can be found at nhbs.com.

The NHBS Guide to Badger Gates

The European Badger (Meles meles) is one of the most iconic species found on the British Isles. These shy and elusive animals spend much of their time during the day hidden away within their extensive underground setts, emerging around dusk to forage on smaller mammals, earthworms, roots, bulbs and fruit.

Within their territories, badgers will follow established routes between foraging areas. When these pathways become obstructed by fencing, such as exclusion fencing for stock or deer, badgers will often dig under the obstruction to regain access to a familiar site and in doing so they may cause damage to the fence and allow in potentially unwanted species. In these circumstances, many developers will install a badger gate to allow badgers to freely access the site. These rectangular gates are constructed of either wood or metal and often feature locking mechanisms to ensure badgers can only pass through in a certain direction.

Although badgers are protected under the Protection of Badgers Act 1992, there are situations where developers need to temporarily or permanently exclude badgers from areas. This may be when they, or their setts, could be at risk of harm or disturbance. In these circumstances, and under acquisition of a license, one-way badger gates can be installed in sett entrances or in fencing surrounding a development to gradually exclude badgers from the area. These badgers will then either relocate to a new territory or to a nearby artificially-created sett.

At NHBS we manufacture a range of badger gates and this article will outline how they can be installed and used in different badger mitigation projects.

Softwood Badger Gate

This softwood badger gate has been designed in accordance with the specifications outlined by Natural England (available here) and is an excellent economic choice for many projects. It is constructed from untreated FSC-certified timber, which ensures badgers will not be harmed if they ingest any chewed wood. This gate has been designed so that it will not jam following periods of rain when the wood may swell.

The softwood gate is suitable for use where badgers require access through a fence. This gate can also be used in exclusion projects; however unlike our aluminium gates they can be damaged by chewing and often have a shorter lifespan.

 

  • Price: £29.99 inc VAT
  • Frame Dimensions: 450mm (H) x 285mm (W)
  • Entrance Dimensions: 250mm (H) x 200mm (W)
  • Material: Untreated FSC timber
  • Weight: 2.1kg

 

 

 

Access Badger Gate

The access badger gate is constructed from marine grade aluminium which ensures it is strong enough for repeated use while keeping it lighter than most steel gates. It features a heavy-duty grill panel which allows badgers to view what is on the other side of the gate, which can encourage some badgers to pass through. It has pointed legs which should be driven into the ground using a wooden mallet, however a hammer can also be used with a block of wood (striking the frame directly may cause warping and damage). The gate has two locking tabs that can be adjusted using a size 10 spanner to allow either two-way or one-way access.

This gate is designed for use in long-term projects where badgers need access through stock or deer fencing. For exclusion projects we would recommend our exclusion gates.

 

  • Price: £87.95 inc VAT
  • Frame Dimensions: 595mm (H) x 295mm (W)
  • Entrance Dimensions: 320mm (H) x 220mm (W)
  • Material: Marine Grade Aluminium
  • Weight: 3kg

 

 

 

Exclusion Badger Gate

The exclusion badger gate is also constructed from marine grade aluminium and comes fitted with a solid gate flap. This solid door has been designed based on evidence that some badgers can learn to use their claws to lift grill gates open. Another feature of this gate is that it does not have legs. This allows the gate to be positioned either vertically or horizontally  in awkward sett entrances where a typical vertical gate would not be suitable. By installing this gate ecologists and developers can be confident that badgers will not be able to re-enter an exclusion zone.

This gate is also available with pointed legs, for installation within exclusion fencing.

 

  • Price: £75.95 inc VAT
  • Frame Dimensions: 400mm (H) x 295mm (W)
  • Entrance Dimensions: 320mm (H) x 220mm (W)
  • Material: Marine Grade Aluminium
  • Weight: 2.6kg

 

 

 

Accessories

Badger Fencing

 

All of our gates can be incorporated into this high tensile wire fencing.  It can be erected as a freestanding barrier or installed across a sett to prevent badgers from digging to form new entrances or to get around any installed gates.

Price: £399 (50m)

 

 

 

Stainless Steel Cable Ties


These strong, corrosion resistant cable ties can be used to quickly and easily secure a badger gate frame to the surrounding fencing.

Price: £8.50 (pack of 20)

Caudon® High Tensile Steel Pegs

These steel pegs are excellent for securing fencing to the ground, particularly in areas where badgers are prone to tunneling. These pegs can also be driven through the access and exclusion badger gates to provide a firmer placement.

Price: £0.95 each

Further Reading:

Badger Behaviour, Conservation and Rehabilitation: 70 Years of Getting to Know Badgers
Paperback | Sep 2015
£19.99

 

 

 

Badgers
Hardback | May 2017
£15.99

 

 

 

The Badger
Paperback | Sep 2010
£4.99

 

 

 

Biology and Conservation of Musteloids
Paperback | Oct 2017
£52.99

 

 

 

Please note that prices stated in this blog post are correct at the time of publishing and are subject to change at any time.

Introduction to sound recording

In recent years, advances in portable recording equipment have led to an increase in the exploration of listening as a method of engaging with as well as studying the natural world. This blog looks at a number of different equipment options across a range of budgets and objectives while briefly outlining some of the main technical considerations.

Equipment and Technical considerations

Tascam DR-40X

For those interested in having a go at sound recording, a handheld recorder is a great starting point and  Tascam have some great entry-level options such as the DR-05X and DR-40X both of which allow you to record uncompressed audio. The advantage of this method is that the recorders are highly portable and require very little set up – invaluable if you’re out and need something that can be used at a moment’s notice.

Tascam DR-05X

The built-in microphones will not compete with a professional external microphone and if recording becomes more than a passing interest dedicated microphones, such as a parabolic, can be a great way to optimise your setup for specific recordings. The right recorder should have a logical menu system and inputs that allow for a suitable upgrade path via the connection of external microphones.

A common type of field microphone makes use of a parabolic dish, effectively acting as a kind of audio zoom lens making them useful for focusing in on a particular sound source. Some of these systems require a different type of power known as plug-in power so you’ll need a recorder able to supply this via a 3.5mm mic/line input as found on the Tascam DR-05X.

Telinga PRO-X Parabolic Microphone System

The Hi-sound and Telinga PRO-X systems are good examples of plug-in powered parabolic systems. If your recorder does not have plug-in power, you can use an XLR to PiP adaptor. This connects to the XLR outputs on your recorder and converts the phantom power produced by the recorder to plug-in power which can run the microphone.

Before heading out make sure you have adequate wind protection for your microphones, as even a slight breeze can ruin a recording if it’s not what you’re after! – Parabolic windshields  – Tascam DR-05 windshield .

Parabolic windshields

We also feature static recording devices such as the SM4 Acoustic from Wildlife Acoustics and the Bar-LT from Frontier Labs.  These waterproof units feature built-in omnidirectional microphones and can be secured to any suitable surface. The long deployment times and scheduling functions make these ideal for long-term bioacoustic studies.

Song Meter SM4 Acoustic Recorder

Over the past few years, a number of smaller, more lightweight passive recorders have been developed.  These include the Song Meter Mini Acoustic, Song Meter Micro, and the Titley Chorus. Such models are very similar in purpose to the larger static recorders however sacrifice some battery life for their reduced size. Their size and affordability make them very suited for large-scale mass deployments.

Titley Chorus & Song Meter Mini Acoustic

 

In the field

To test a small cross-section of equipment, I headed to a small forest within the Dartmoor National Park to capture the distinctive call of the Common Cuckoo, armed with a Tascam DR-40,  XLR to PiP adaptor, Hi-Sound Stereo Parabolic system, and a Wildlife Acoustics SM4 Acoustic recorder.

I initially walked a narrow path that cut through a steep section of woodland, at this point the cuckoos could be heard faintly calling from lower down in the valley. Locating a suitable tree easily accessible from the path, I decided to deploy the SM4. The SM4 has been designed to be exceptionally quick to set up straight out of the box and for this field test, I set it to ‘always record’ and secured it in place with a Python Mini Cable Lock.

Static recorder in place, I then used the Tascam DR-40 whilst walking through the woodlands to capture the changing soundscapes as I moved away from the sound of the river and closer to the open moor.

Tascam DR-40 in the field

The DR-40 has a clear front-facing screen that is easy to read in all light levels, pressing the record button once arms the unit allows you to see and hear the recording levels. A good pair of headphones is recommended for use with this unit as they are susceptible to a certain amount of handling noise.

I then connected the parabolic to the Hi-Sound parabolic to the Tascam using the XLR to PiP adapter.

Dropping off the path I headed towards the middle of the wood where the Cuckoos could be heard calling in the distance. The high directionality of the parabolic microphone was excellent allowing me to pick out individuals among the woodland birds present.

Late in the evening whilst preparing to pack up I was rewarded with a fantastic display as several cuckoos alighted on the trees around me, a recording of which is included below.

Summary

I highly recommend getting out and exploring natural soundscapes in your local area, especially at this time of year. As with any piece of equipment, it takes a few trips to really get a feel of what they’re capable of, but any one of these items could become a reliable piece of gear for your sonic explorations.

To view our full range of sound recording equipment please visit www.nhbs.com. If you have any questions on our sound recording range or would like some advice on the best set-up for your project please contact us via email at customer.services@nhbs.com or phone on 01803 865913.

Further Reading:

Listening In The Field: Recording and the Science of Birdsong
Hardback | May 2018
£29.99 

Joeri Bruyninckx traces the development of field recording and its use in field ornithology. Drawing on expertise from experimental music to serious science, it provides a thorough and wide-ranging investigation into the power of sound and listening.

The Sound Approach to Birding: A Guide to Understanding Bird Sound
Hardback | Dec 2006
£29.95

 

In The Field: The Art of Field Recording
Hardback | May 2018
£13.99

 

Please note that prices stated in this blog post are correct at the time of publishing and are subject to change at any time.

 

The NHBS Guide to Kick Sampling

Freshwater invertebrates Credit: Katharine Clayton

The presence or absence of freshwater invertebrates such as caddisfly (Trichoptera) and mayfly (Ephemeroptera) larvae, dragonfly and damselfly nymphs (Odonata) and planaria (Tricladida) can be used to provide an indicator of the health status of waterways.

Kick sampling

Kick sampling is a useful method for collecting these and other invertebrates from shallow waters and one of the key techniques used in monitoring freshwater invertebrates in rivers. The technique involves agitating the stones or sediment of a river or stream by foot and catching the sample in a sturdy hand net that is held downstream. Stones and logs can also be washed off carefully into the net and samples are usually taken both from faster flowing riffles and still areas of the river. The sample is then rinsed out of the net into a tray full of water for sorting and identification. Kick sampling is primarily a qualitative technique, to look at species diversity or presence/absence, but quantitative measures can be taken if a quadrat or transect is used on the floor of the water body to limit the sampling area and sampling time is controlled.

Scientist sorting biological net samples at a wetland

NHBS manufactures a range of hand nets that are the industry standard for kick sampling and are widely used by environment agencies and ecological professionals. Our Professional Hand Nets conform to the Environment Agency standards and we are the official Riverfly Partnership supplier. The Riverfly Partnership is a network of organisations bringing together anglers, conservationists, entomologists and relevant water authorities whose aim is to protect and monitor the water quality of our rivers.

The NHBS net range also includes smaller nets designed for students of all ages and a wide range of accessories and books to help with sample sorting and identification. Our hand nets are manufactured with a diverse range of net bags and handles to meet a wide variety of surveying purposes. We can also design and manufacture bespoke net designs in our workshop in Devon, so please do get in touch if you have special requirements.

Professional Hand Nets

The NHBS Professional Hand Net has been used for over 30 years in Environment Agency monitoring and was purpose designed to be lightweight, strong and long-lasting, with individual nets often still being used after ten years. Key features of the Professional Hand Nets include:

  1. The net bag is protected by the outer frame to minimise abrasion when kick sampling on stony surfaces.
  2. A range of mesh sizes are available, making it the ideal net for aquatic surveying of all macro- and microinvertebrates in shallow water. The bag mesh is either made from 1mm or 2mm woven polyester or precision welded nylon mesh (53µm to 500µm) and manufactured to international standards so that the mesh will stay the same shape and size, even under stress.
  3. The inner brass frame securely holds the bag away from the stony substrate and also allows the bag to be removed for sterilisation between sites.
  4. The comfortable handle is available in either a lightweight FSC wooden or aluminium version and both will float in water.  Two-part and three-part sectional wooden handles are also available, which can be unscrewed for transport or extended with extra sections.

Student Hand Nets

The Professional Hand Net is also available in a smaller Student version that is 200mm in width. This is designed to the same high quality as the larger Professional net but is ideal for educational use. The Student Hand Net is available with either a FSC wooden or aluminium handle and with net bag mesh sizes ranging from 250µm to 2mm, in standard 280mm or 380mm depth. We can design and manufacture bespoke nets so please do contact us with any requirements.

Lightweight Eco-Nets

The Lightweight Eco-Net has a strong aluminium frame that will withstand regular use both for kick sampling and pond dipping. Net heads are 160mm in width and 1mm and 2mm mesh bags are available to fit this frame. Bags attach to the head using industrial hook and loop strapping, making them easy to remove for replacement or sterilisation.

Riverfly Partnership Approved Kit

The Anglers’ Riverfly Monitoring Initiative (ARMI) is coordinated by the Riverfly Partnership and involves anglers and conservation volunteers from more than 100 partner organisations carrying out regular freshwater invertebrate surveys to check for severe changes in water quality. The Riverfly Partnership Approved Kit has been designed in conjunction with the Riverfly Partnership and contains everything the volunteers need to carry out these vital surveys: Professional Hand Net, bucket, sample trays, pipettes, freshwater invertebrate ID guide, spoon, brush and magnifiers.

Banner Net

The Banner Net is a rectangular net measuring 90 x 100cm that is supported on each side by a 120cm wooden pole. The bottom edge of the net is reinforced with a removable, flexible rubber rod. Two hook and loop tabs keep the net rolled neatly when not in use. Available with 500mm mesh, which is ideal for kick sampling of benthic macroinvertebrates.

Kick Sampling Accessories

  1. White Sampling Trays  
  2. White Plastic Bucket 
  3. Graduated Pasteur Pipette
  4. Featherweight Forceps
  5. Q1 Quadrat
  6. 60ml Collecting Pot
  7. Large Pipette 
  8. 9 Pocket Round Sample Specimen Tray

The Freshwater Name Trail

This 8-page fold-out chart is a fully illustrated key to help users identify the main animal groups found in freshwater. None of the identification in the key goes beyond family level, and some of it stays at the phylum or class.

Freshwater Life of Britain and Northern Europe

A beautifully illustrated guide to the wide variety of species found in rivers, streams, lakes and ponds in Britain and Europe.

 

See our complete range of kick sampling equipment online.

NHBS Guide to Dormouse Survey Equipment

Dormice are a distinctive family of rodents, found widely across Eurasia and Africa. The Hazel Dormouse (Muscardinus avellanarius) is a native British species which resides primarily in deciduous woodland. They are protected by EU law because of their rapidly declining numbers – studies suggest they have suffered a 72% population reduction in the last 22 years. Dormice are an important bioindicator as they are particularly sensitive to habitat and population fragmentation, so their presence is an indication of habitat integrity.

To enforce legal protection and ensure the success of conservation projects, current data about the distribution of Hazel Dormice is very important. A variety of survey equipment and methods can be used by licenced dormouse handlers and wildlife enthusiasts.

Nest Boxes

Perhaps the simplest survey technique to determine dormouse presence is searching for the nest box residents. Dormouse nest boxes are largely similar to standard bird boxes, but with the entrance hole facing the tree. Nest boxes can be important conservation tools as they can boost the local dormouse population density and aid re-introduction schemes.

The Standard Dormouse Nest Box is built from FSC softwood and has a removable lid with a wire closure for monitoring.

The box is also available with an added perspex screen. The perspex inner screen sits inside the lid and allows you to check the box for any inhabitants without any dormice escaping or being injured by quick replacement of the lid, especially when the box contains a mother and young.

Dormouse Tubes

Dormouse nest tubes are a cheap, easy and popular method of determining the presence of dormice within a habitat. They can be an effective alternative to using wooden nest boxes.

The tubes consist of a wooden tray and a nesting tube. Dormice make their nests in the tubes and it is these that are used as indicators of their presence in the habitat. Nest tubes can be set up and checked without a licence until the first evidence of dormouse activity is found. After that, only a licensed handler can check them. For attaching to a tree, Hook and Loop Strapping is a more environmentally friendly alternative to plastic cable ties, as they are reusable, reducing plastic waste.

Dormouse Footprint Tunnels

The latest dormouse surveying technique uses footprint tunnels. This technique was created by Suffolk Wildlife Trust with PTES funding and has since been recommended in the CIEEM magazine In Practice in September 2018.

It is a non-invasive survey technique, which does not require a licence as the chance of disturbing dormice is very low. The 40cm tube, houses a wooden platform which contains the charcoal ink and paper on which footprints are left. Compared with nest tube surveys, footprint tunnels can reduce the survey period required and provide an indication of the presence or likely absence of dormice at a site.

Dormouse Nut Hunting

Dormice leave very characteristic marks when they eat Hazel nuts. They gnaw a round hole in the shell leaving a smooth edge with very few teeth marks, unlike mice or voles. Systematic nut searches under Hazel trees are still regarded as one of the best survey techniques, only hand lenses and a keen eye are required.

Accessories and books

Below are some accessories and books that are commonly used for dormouse surveys and monitoring:

Small Mammal Holding Bag

Pesola Light-Line Spring Scales

Pesola PTS3000 Electronic Scale

Heavy Duty Extra-Large Polythene Sample Bags

Animal Handling Gloves

LED Telescopic Inspection Mirror

How to Find and Identify Mammals

Britain’s Mammals: A field guide to the mammals of Britain and Ireland

Continue reading “NHBS Guide to Dormouse Survey Equipment”

NHBS Guide to Night Vision and Thermal Optics

There are many scenarios where our attempts to observe and survey certain species are hampered by our limited sensory systems. Many animals are difficult to detect because they utilise cryptic colouration or disruptive patterns, or they have evolved ingenious behaviours to conceal themselves within their environment. In other cases, environmental conditions such as low light levels or fog, can reduce visibility and disguise even some of our most obvious resident species.

Ecologists, researchers and amateur wildlife enthusiasts have overcome these sensory limitations by using thermal imaging and night vision optics. This article will cover how these different technologies function, highlight their key specifications and give recommendations for those looking to purchase one of these devices.

© Dûrzan cîrano

Thermal Imaging

Thermal imaging works by using an electronic detector element to convert the infrared light (heat) emitted by objects in the environment into a visible pattern of colours that vary depending on the temperature of the object. Thermal imaging devices (TIDs) are becoming increasingly common in ecological surveys because, unlike night vision devices, they can produce an image in daylight or complete darkness, even through fog.

When choosing a TID there are a few key technical specifications that you should consider for your project:

  • Resolution – The clarity of the images/videos is determined by the number of heat sampling points. The higher the resolution, the easier it is to spot small animals at a distance.
  • Refresh Rate – Determines how often the screen is updated with a new image. A refresh rate of 30Hz or more is recommended for fast-moving animals such as birds and bats.
  • Zoom – This is particularly useful for larger species identification and counting your target more accurately.
  • Field of View (FOV) – The horizontal and vertical angle of view that you can see through the thermal imaging device. A wider field of view is useful when detecting small animals.
  • Maximum Detection Range – Gives an indication of how far the device will be able to detect a human-sized object effectively.
Pulsar Axion XM30S

This thermal monocular has a compact, ergonomic design and features all the excellent capabilities of Pulsar’s more advanced thermal imaging devices.

  • Refresh rate: 50Hz
  • Sensor resolution: 320 x 240p
  • Digital zoom: 2x, 4x
  • Field of view: 7.3° horizontal
  • Max Detection Range: 1200m
  • Video Recording: Yes
  • Streaming capabilities: Yes
  • Price: Basic



See the full range of Pulsar Axion models

Pulsar Helion 2 XP50

A powerful thermal imaging monocular with an impressive resolution and detection range, as well as full remote control through the Stream Vision app on a smartphone or tablet.

  • Refresh rate: 50Hz
  • Sensor resolution: 640 x 480p
  • Digital zoom: 2x, 4x, 8x
  • Field of view: 12.4°
  • Max Detection Range: 1800m
  • Video Recording: Yes
  • Streaming capabilities: Yes
  • Price: Professional-range

See the full range of Pulsar Helion XP & XQ models

Guide TrackIR Pro 19

An advanced model, this thermal monocular has a fantastic field of view and thermal sensitivity, as well as the ability to view live feed and take images and videos remotely.

  • Refresh rate: 50Hz
  • Sensor resolution: 640 x 480p
  • Digital zoom: 1x-8x
  • Field of view: 22.9° x 17.2°
  • Max Detection Range: 1850m
  • Video Recording: Yes
  • Streaming capabilities: Yes
  • Price: Professional-range 

See the full range of Guide models

Night Vision

Night vision technology operates either by using an image-intensifier tube (analogue) or an electronic sensor (digital) to amplify the small amount of light present in dark environments to generate a bright image. They typically produce a monochromatic green or greyscale image, however some newer technologies are now able to capture colour images in low light conditions.

There are a few specifications that you should consider when choosing an night vision device (NVD):

  • Viewing Range – The distance to which you can see and distinguish objects using the device can be crucial for certain projects. A low-end NVD will typically have a viewing range of around 200m, while more high-end models can achieve viewing ranges of up to 500m.
  • Analogue Night Vision – These scopes are grouped into generations. Gen 1 scopes are the most economic but have a limited range (approximately 75m), lower resolution and limited field of view. Gen 2 and 2+ scopes offer performance improvements such as longer range, better image resolution and greater field of view.
  • Digital Night Vision – Digital devices typically produce higher quality images than Generation 1 scopes, often have a video output or SD card allowing video capture.
  • IR illumination – Most night vision devices have a built-in IR illuminator to increase the brightness of the images it takes, however purchasing an additional IR illuminator may be necessary when working in extreme darkness.
SiOnyx Aurora BASE

This innovative night vision monocular utilises SiOnyx’s Ultra Low-Light Sensor Technology to record colour footage, not only during the day but also in both low-light and night-time conditions. It also features a wifi module to stream or transfer photos and videos.

  • Digital: Ultra Low-Light CMOS sensor
  • Digital Zoom: 3x
  • Display colour: Colour, phosphor green, monochrome
  • Video Recording: Yes
  • Streaming capabilities: Yes
  • Price: Mid-range

 

See the full range of SiOnyx Aurora models

Bushnell Equinox Z2

An impressive digital night vision monocular with a high sensor resolution and viewing range of up to 230m. It can take HD video recordings which can be streamed over Wifi using the dedicated Equinox Z2 App.

  • Digital: CMOS sensorDigital Zoom: 1-3x
  • Field of view: 105m @ 1000m
  • Display colour: Colour (in daylight), greyscale
  • Video Recording: Yes
  • Streaming capabilities: Yes
  • Price: Mid-range



See the full range of Bushnell Equinox Z2 models

MORE INFORMATION

To learn more about some of these products or to browse our full range of night vision and thermal imaging optics visit our online store at NHBS.com.

If you would like some more advice on choosing a thermal imaging or night vision device contact us via email at customer.services@nhbs.com or phone on 01803 865913.

NHBS Guide: How to choose a Trail Camera

As we enter the warmer spring months many of the UK’s mammals become more active as they establish territories, build nests and find mates. Despite all this activity, observing and surveying these animals is often a challenging task. Trail cameras offer an easy, effective and non-invasive solution in many of these situations, earning their place as an essential kit piece for any ecologist or wildlife enthusiast.

Listed below are a selection of new models and old favourites from each of our trail camera ranges. The primary features we find useful to distinguish between models are:
–  whether the camera has a colour viewing screen for reviewing footage in the field
– whether the camera has low glow LEDs (better flash range and video quality) or no glow LEDs (totally invisible to the human eye)
– trigger speed (how quickly the camera takes a still image once the infrared is triggered
– recovery speed (if known, how quickly the camera takes a second picture)
– video quality and framerate (video footage at 60fps is noticeably smoother)

Browning trail cameras

Browning trail cameras boast a fantastic quality of workmanship, designed and developed in the US they are deservedly popular and very reliable. A key feature of this brand is the ‘Smart IR technology’ which automatically adjusts the IR flash, ensuring crisp quality night photos.

The video below demonstrates the fantastic quality of these cameras.

Browning Command Ops Elite
Perfect entry level camera with a superb image and video quality with audio recording and and time-lapse features

Command Ops Elite

 

* 18MP images
* 1280 x 720p HD videos with audio
* Low glow LEDs
* LCD screen with Black Text
* 24m Flash range
* Good trigger speed of 0.3s

 

 

Strike Force HD Pro X
This compact mid-range camera has a fast trigger speed and an excellent picture/video quality ensuring you capture every moment in fantastic quality.

Strike Force HD Pro X


* 20MP images
* 1600 x 900p HD videos with audio
* Low glow LEDs
* Full-colour 1.5-inch LCD screen
* 37m Flash range
* Fast trigger speed of 0.22s
* Programmable stop/start timer to control when the camera triggers

 

 

Browning Spec Ops Elite HP4
A high-end camera with excellent images and video quality thanks to a framerate of 60fps.

Spec Ops Elite HP4


*22 MP images
* 1920 x 1080p HD videos at 60fps with audio
* 4 powerful long range no-glow LEDs
* Full-colour 2-inch LCD screen
* 27m Flash range
* Adjustable 0.2s – 0.7s trigger speed
* Programmable stop/start timer to control when the camera triggers

 

 

Browning Patriot
This high-end model features unique ‘dual lens technology’ which ensures that all of your captured footage is of the highest quality in the day and at night

Browning Patriot


* 24MP images
* 1920 x 1080p HD videos at 60fps with audio
* No glow LEDs
* Full-colour 2-inch LCD screen
* 34m Flash range
* Programmable stop/start timer to control when the camera triggers
* Adjustable trigger speed and detection range

 

 

Bushnell Cameras

With an extensive history and a range of professional and entry-level models available, Bushnell trail cameras offer a reliable choice for quality and durability.

Bushnell Prime
A fantastic entry-camera with an impressive trigger speed.

 

* 24MP images
* 1280 x 720p HD videos with audio
* Low glow LEDs
* LCD Text display
* 30m Flash range
* Fast trigger speed of 0.3s

 

 

Bushnell CORE DS Low-Glow
This high-end camera has a fantastic trigger speed and recovery speed, as well as an extremely high picture and video quality. It uses two sensors, one for day and one for night conditions, which together ensure footage is always sharp.

Bushnell DS CORE Low-Glow

 

* 30MP images
* 1920×1080p HD video with audio
* Low glow LEDs
* Front-facing Colour display
* 30m Flash range
* Fast trigger speed of 0.2s
* Dual Sensor for day and night recordings
* Also available as a no-glow model

 

SpyPoint Cameras

Renowned for their lightning fast trigger speeds and recovery speeds, SpyPoint cameras ensure you never miss a wildlife moment.

SpyPoint Force-Dark
A robust and compact mid-range camera with a wealth of adjustable settings so you can take the best footage possible.

SpyPoint Force-Dark


* 12MP images
* 1280 x 720p HD videos with audio
* No glow LEDs
* Full-colour 2-inch LCD screen
* 27m Flash range
* Fast trigger speed of 0.07s
* 16GB SD card and card reader included

 

SpyPoint Solar-Dark
Builds on the Force-Dark by adding a solar panel which allows you to gather footage indefinitely when placed in sufficient sunlight.

SpyPoint Solar-Dark

 

* 12MP images
* 1280 x 720p HD videos with audio
* No glow LEDs
* Full-colour 2-inch LCD screen
* 27m Flash range
* Fast trigger speed of 0.07s
* 16GB SD card and card reader included
* Compact solar panel attached to the top

 

Ltl Acorn Cameras

These compact cameras utilise three different motion sensors to ensure footage is taken at the optimum moment. They also feature a cellular module which when used with a SIM card allows you to receive captured images to a mobile or email address.

Ltl Acorn 5310
A great mid-range camera with excellent picture and video quality

Ltl Acorn 5310

 

* 12MP images
* 1920 x 1080p HD videos with audio
* No glow LEDs
* 15m Flash range
* Trigger speed 0.6s
* Colour LCD screen

 

Reconyx Trail Cameras

These high-end trail cameras are a benchmark of high-quality and reliability.

Reconyx UltraFire XR6 Trail Camera
A robust camera with excellent video quality and a number of impressive features.

Reconyx UltraFire XR6 Trail Camera

 

* 8MP images
* 1920 x 1080p HD videos with stereo audio
* No glow LEDs
* Full colour LCD screen
* 25m Flash range
* Compatible with Buckview Advanced Software, to organise and map stored images.

 

Accessories

A number of accessories can be bought to help mount and secure your trail camera your camera in the perfect position.

Python Mini Cable Lock

Python Mini Cable Lock
Compatible with all of our retailed trail cameras. This versatile lock has been designed to be extremely resilient to damage and picking, protecting your camera from any potential theft.

Security Boxes
Many of our trail cameras can be contained within a matching security box which provides maximum protection when in the field. All of our security boxes can be locked using a standard padlock or python cable. Make sure when purchasing a security box that it will fit the intended trail camera.

See our full range of Security Boxes on our website.

Batteries
The batteries you use in your trail camera can influence its performance in the field. Lithium-ion batteries are one of the most popular choices because they produce a high voltage per cell (1.6v) giving a brighter LED flash and a greater flash range. Rechargeable alkaline batteries offer a more economical and environmentally friendly alternative, however, when in use their voltage decreases over time and they produce proportionately darker LED flashes and consequently, photographs/videos are less illuminated. Standard alkaline batteries are also a suitable economic alternative.

SanDisk Class Cards
Ensuring you use a high read-write speed SanDisk Class card is highly advised for all of our trail cameras. Be sure to check the maximum SD or SDXC card capacity for your intended camera as these can vary between models and brands.

Solar panels
Where sufficient sun is available, the addition of a solar panel to your trail camera can extend its recording life indefinitely. Browning, Bushnell, SpyPoint and Ltl Acorn all offer compatible solar panels for their trail cameras.

All of our trail cameras can be purchased as starter bundles which include an SD card and all the batteries you need to power the camera. The complete trail camera range can be found at www.nhbs.com

Can’t decide which camera you need? Why not take a look at our guide on choosing the camera that’s right for you.

Continue reading “NHBS Guide: How to choose a Trail Camera”

NHBS Guide to Bat Survey Equipment

Common Pipistrelle by Meneer Zjeroen on Flickr

With Spring around the corner and the bat survey season fast approaching, it is a great time to make sure you have everything ready for the busy months ahead. Over the winter we have been busy reviewing our current products and cataloguing new ones. Here, we have picked out some exciting new products as well as some old favourites to take a look at.

The NHBS Harp Trap

Designed and built on-site at our workshop in Totnes, our three-bank Harp Trap features some innovative designs such as a winding line carrier and anti-tangling system that makes assembly and disassembly, easy and efficient. Made mostly from aluminium, the trap is surprisingly lightweight at just 15kg, whilst remaining sturdy and durable during use. The harp trap is 190cm long and has a catch area of about 4m². The catch bag is approximately 60cm deep and its entrance is about 39cm wide. When collapsed, the catch bag wraps around the disassembled frame and is held tightly with Velcro straps so that it can be neatly stored and carried in its bag. Initial feedback on its design and function has been very positive and we are excited to develop our design based upon suggestions from professional bat workers. Our standard trap will be a three bank, but if you would like a bespoke two or four bank trap, please contact us so that we can discuss your requirements.

BTHK Tree-Roost Net

Based on the design by Henry Andrews from the Bat Tree Habitat Key (BTHK) project, the BTHK Tree-Roost net is uniquely designed for trapping bats as they emerge from tree roost sites. The net is set up against a roost site prior to dusk so that it will catch any bats that emerge, keeping them safely in the bag ready for identification, measuring and ringing. The diamond shape of the net head can pivot and collapse inwards to ensure that the net fits flush against any tree, making it safer for bats and easier for surveyors. The net bag is made from fine woven nylon mesh that is soft and will not damage the delicate wings or feet of bats. The net bag can be easily removed for cleaning and features a clear plastic rim that fits around the collar and prevents bats from climbing up and out of the net when it is in place. The length of the handle is 4 meters (breaks down into 3 sections for ease of transport) and the depth of the bag is 1 metre. You may also be interested in the book Bat Roosts in Trees which is a guide to finding tree roosts.

Song Meter Mini Bat Detector

The Song Meter Mini is a more lightweight and affordable alternative to the SM4BAT (see below). This lightweight detector  – weighing only 290g including batteries – allows you to set up and schedule your recordings using your mobile device and a free, simple-to-use app. The detector performs full-spectrum and zero-crossing recording and can record for up to 30 nights using four AA batteries. An optional acoustic microphone allows you to record birds and other wildlife when not recording bats. For more details, see our dedicated blog post where we test this new detector in the field.

Titley Chorus

The latest static detector from Titley Scientific, capable of functioning as both an acoustic or ultrasonic recorder to suit all acoustic surveying needs. Lightweight (435g without batteries), compact and robust, this weather proof detector can be deployed for up to 40 nights in full spectrum ultrasonic or 300 hours acoustically. Set up and calibration is handled through the internal OLED screen and the internal GPS receiver automatically sets the clock, calculates sunset and sunrise times, and records the location of the device, making deployment incredibly straightforward. As standard, the Chorus comes with an acoustic microphone, and a second can be purchased for stereo recording, please see the chorus ultrasonic options for bat surveys.

Elekon Batlogger M2

An ergonomic and sophisticated bat detector from Elekon, this is designed as a successor to the ever popular Batlogger M. Featuring an omnidirectional weatherproof microphone which allows for the recording of full spectrum ultrasonic bat calls, the M2 also features real-time heterodyne monitoring capability for the listening in the field.

Files are saved in WAV format onto the external micro SD card along with other useful data including temperature, humidity, light levels and GUANO metadata. An upgraded menu system with preset recording profiles for different survey applications, as well as the ability to build custom ones, makes the M2 a reliable and initiative option for bat work. For more details, see our dedicated blog post, where we tested this bat detector in the field.

Echo Meter Touch 2 Pro

The Echo Meter Touch 2 Pro lets you record, listen to, and identify bat calls in real-time on Android devices. All you need is your compatible Android device (see the nhbs.com website for compatible models), your Echo Meter Touch 2 Pro, and the Echo Meter Touch App which is free to download. When plugged in, the Echo Meter Touch 2 Pro enables you to listen to bats in real time, view live sonograms in full colour, record onto your device, and identify calls to species level in seconds. If your device has GPS functionality, the Echo Meter Touch 2 Pro will also log the recording location and path of the recording session. In addition to full spectrum recording, the Echo Meter Touch 2 Pro allows playback in real time expansion and heterodyne listening modes. Trigger sensitivity and sample rate are adjustable, and three gain settings allow users to optimise their detector to their target species and ambient conditions.

SM4BAT FS

The SM4BAT FS is a full spectrum detector for passive surveying use. Robust and weatherproof, it will record 16-bit full spectrum calls and can store up to 512GB of data. A versatile scheduling function allows you to set when you want to record and the battery can last up to 450 hours. The SM4BAT FS is easy to fit to a tree or post and is compatible with a variety of accessories such as GPS unit and microphone extension cables. The SMM-U2 ultrasonic microphone is available with the SM4BAT FS and is a highly sensitive microphone that produces high quality, low noise bat recordings over long distances. Easy to set up and producing detailed call recordings for analysis, the SM4BAT FS is ideal for unattended use in the field.

Anabat Swift

The Anabat Swift from Titley Scientific is based on the excellent design of the Anabat Express, but has the advantage of recording in full-spectrum, as well as zero crossing. Users can choose between sample rates of 320 or 500kHz and data is saved onto an SD card. Two SD card slots are available, allowing you to save more bat calls without changing cards. The Swift also has a built-in GPS receiver that automatically sets the clock, calculates sunset and sunrise times and records the location of the device. It will also record automatically from sunrise to sunset every night (based on GPS coordinates) as one of the automatic recording settings.

BatLure

The BatLure can be used as a lure to improve catch rates of bats for survey or research, to attract bats to new artificial roosts such as bat boxes or constructed hibernacula, with bat detectors at training events or prior to bat walks and for calibration of bat detectors. The Batlure can playback sounds with frequencies of up to 100kHz and is capable of playing both real time and time expanded recordings of bat vocalisations. It is very compact and robust and has a tripod attachment mount, making it easy to set-up in your desired location. It plays sounds from an SD card which is supplied complete with several pre-loaded recordings. Users can also add their own recordings onto the card.

Ecotone Ultra Thin Series M mist net for bats

The Ecotone Ultra Thin Series M is ideal for catching bats and is available in 2 mesh sizes. Both are made from nylon (0.8mm monofilament) and have 4 shelves. Available in lengths from 3m to 21m, you can pick the mesh size and length that best suits your survey and situation.

 

Explorer Premium Digital Endoscope Camera

The Explorer Premium Digital Endoscope is lightweight and easy to operate. It can record still images or video on to a microSD / microSDHC card (not included). The screen can be detached whilst the camera is in operation and viewed up to 10m away. The camera head has a diameter of 9mm and the cable is 91cm long, giving easy access to nest boxes, burrows, nests, crevices etc. Lighting levels can be adjusted to minimise disturbance to animals.

Accessories

Below are some accessories that may come in use when surveying bats:

Petzl Actik Headtorch

Stainless Steel Hand-Held Counter

Animal Handling Gloves

dialMax Vernier Dial Caliper

ETI Hygro-Thermo Pocket Sized Hygrometer

Small Mammal Holding Bag

Telescopic Inspection Mirror

High Flier Mist Net Support System (for Bats)

Further Reading

Below are some books that may come in use when surveying bats:

Bat Roosts in Trees
British Bat Calls
Bat Surveys for Professional Ecologists
The Bat Worker’s Manual
The Handbook of Acoustic Bat Detection
Bat Calls of Britain and Europe
Social Calls of the Bats of Britain and Ireland

A note on licensing

Please note that in the UK, all bats and their resting or breeding places are protected by law. Any bat survey work must be undertaken by a licensed bat ecologist and when purchasing certain products, we ask you to confirm your license or give an appropriate reference. For more information, please visit https://www.gov.uk/government/collections/bat-licences.

Watching Wildlife – How to choose the right Nest Box Camera

This is part two of our series that looks into different ways of filming wildlife in your back garden. In this part, we will take a look at nest box cameras and how to choose the right one for you. For tips on how to choose the right trail camera, check out part one of this series


There is a whole world of wildlife in our back gardens, but often these creatures can be elusive or hidden away.  Our range of wildlife equipment can offer you an amazing insight into their world from the comfort of your house, without the risk of disturbing your wildlife.

Come early spring, our garden birds will begin their breeding season. Placing a nest box in your garden will not only give breeding pairs a helping-hand in finding somewhere safe to have their young. But it also provides an opportunity for you to get up close and personal with the goings-on inside with the use of a nest box camera. There are several options and kits out there and a few things to think about when it comes to picking a nest box camera. Here, I will offer some advice and options to ensure you can find the kit that is right for you.

nest box camera
A glimpse into the nest box by Simon Redwood via Flickr (CC BY 2.0).

Wired, Wireless or WiFi?

The difference in nest box cameras come mainly in the way that you receive images from the camera itself. These are either wired, wireless or WiFi. Standard Definition Wired kits and High Definition Wired kits can provide better, higher quality, more reliable images, but are sometimes not as convenient as Wireless or WiFi kits.

IP nest box cameras are also wired cameras, however they are powered and transmit footage via supplied Ethernet cables. These cameras have a great video quality as well as the ability to remotely view your footage on a computer or smartphone.

Note that Wireless and WiFi cameras still require power from either the mains (extension leads are available to buy separately) or from an external rechargeable battery.

Kit Contents

If you are completely new to nest boxes and nest box cameras, complete kits are available with a nest camera and a nest box. Alternatively, if you are looking to purchase a nest box camera, but you already have a nest box, then you can buy nest box cameras separately

Viewing your footage

You can view your footage in a variety of ways depending on what camera or extra equipment you have.

Standard Definition Wired – These plug straight into your TV with an AV cable. However if you want to view and record footage on your laptop or computer, you can buy a USB video capture device for both Windows and MacOS. The software included with these USB devices also allows you to set up motion detection or schedule recordings.

High Definition Wired – These cameras use a HD Converter which, when plugged into a monitor or TV, can show a live-feed from your nest box in 1080p HD quality. Theses cameras can be plugged into a USB capture device, however they can only transmit standard definition video when used in this way. These cameras do not record audio.


Wireless
– These cameras transmit their footage to a receiver which can then plug directly into your TV using the provided AV connectors, or into your PC or laptop via a USB capture device.

 

WiFi – These cameras transmit their footage over their own WiFi connection. This means you can connect your smartphone, tablet or PC to the camera’s WiFi to view or record footage.

 

IP – These cameras transmit their footage via long Ethernet cables which are plugged either directly into your router or into a wifi booster on the same network. Once set up on a PC or smartphone app, you can watch live footage of your nestbox from anywhere in the world.

Wired HD Outdoor Camera– These cameras use the same technology as the wired HD nest box camera, but in a weatherproof housing. They are perfect for installing in an outdoor space, particularly near areas of activity such as bird feeders or nest box entrances.  These cameras do not record audio.

If you need to use a wireless camera, a Digital Video Recorder kit is also capable of live-streaming. The wireless receiver can be plugged into the DVR which can be connected to your internet router to enable live-streaming. The DVR itself allows you to set up motion-detection or scheduled recording. You can also add up to four cameras to the DVR which may be useful if you want to watch from multiple angles or from multiple nest boxes.

Nest Box Camera
Great Tit Nest via Nest Box Camera on Windows computer screen ©Bryony James

Species

You may have a particular species of bird in mind that you are hoping to capture on your nest box camera. Our nest box camera kits with boxes are aimed towards common garden birds. The species of birds that you may attract depends on the entrance-hole size.

A 32mm hole, such as that of the Gardenature Nest Box Camera System, is suitable for House Sparrows, Nuthatches, Blue Tits, Coal Tits, Marsh Tits and Great Tits. It also has a removable front panel that is ideal if you are looking to attract robins or wrens.

Nest Box Camera Kit
Nest Box Camera Kit

The Nest Box Camera Kit has a removable 29mm plate that can attach over its 32mm hole meaning it is capable of attracting a range of species. If you are looking to attract anything larger or a more ‘picky’ species, then you may want to buy a species-specific nest box and fit one of our separate nest box cameras to this.

The Hedgehog Camera Kit

The Hedgehog Camera Kit – Wired camera

If you are lucky enough to have hedgehogs in your garden, why not see what they’re up to alongside giving them a safe place to nest? Our Hedgehog Camera Kit includes a high-quality wooden hedgehog nest box, designed and tested by the Hedgehog Preservation Society. It also includes a tiny camera that can easily be screwed to the roof or side of the box with no modifications required. Available with wired, wireless or Wi-Fi cameras.

Suggested Reading

Nest box
CCTV for Wildlife Monitoring – An Introduction

For a collection of handy tips, tricks and ideas, Susan Young’s book CCTV for Wildlife Monitoring is an ideal guide for photographing wildlife in your garden. Whether you are an experienced trail camera user or a newbie looking to order your first nest-camera, Susan Young’s book will offer a wealth of information to help you get even more out of your equipment.

If you wanted to read more about how to make, monitor and maintain your bird box, Nestboxes: Your Complete Guide is a great book that will guide you through everything you need to know about your nest box and its inhabitants.


Would you like some more advice on which trail camera or nest box camera is most suitable for you? Contact us on +44 (0)1803 865913 or email customer.services@nhbs.com . Alternatively, reply below and we will get back to you.